Yutori.

Yutori Forge: measured ritual, maker-built. Cedar saunas, mahogany cold plunges, and cedar-and-copper outdoor shower work, owner-direct from Graham, Washington.

Cedar sauna interior at blue hour — löyly steam rising from the hot stones
Heat

Ladle löyly over hot stones.

Clear Western Red Cedar, traditional heat, the way sauna has been done for centuries. Optional red + near-infrared therapy when you want it.

Mortise-joined mahogany cold plunge, full view — water surface at the brim, chiller cabinet integrated
Cold

Drop into 37°F mahogany.

A built-in chiller holds the bathing basin at 37°F on a standard 120V / 15A GFCI outlet. Full immersion, seated. The shock, then the calm.

Cedar + copper outdoor shower, full view — clear Western Red Cedar posts and oversized copper rain head
Rinse

Finish under copper rain.

The working cedar-and-copper shower closes the backyard sequence. Current outdoor shower configurations are discussed project by project.

Heat. Cold. Rinse.

A working backyard ritual, built by the same co-founder makers in Graham, Washington.

Clear Western Red Cedar sauna exterior detail with glazing and standing-seam roof

Cedar Sauna

This isn’t a flat-pack kit. Hand-built clear Western Red Cedar, traditional löyly heat, and optional red + near-infrared therapy.

4′ × 7′ hot room · R-19 insulated · 240V

Explore the build
Mahogany cold plunge studio detail with dark surround and integrated basin

Mahogany Cold Plunge

One standard outlet. Full immersion at 37°F. Mortise-joined mahogany around a bathing basin, with the chiller built in.

37°F · 120V / 15A GFCI · seated immersion

Explore the build
Close-up copper rain head with water falling over cedar outdoor shower

Cedar + Copper Shower

Yutori has built cedar-and-copper outdoor shower work. See the working build and discuss what fits your space.

Project-specific · details confirmed before quote

Explore the build

Plan your ritual

A few quick answers
What draws you in?

This isn’t a flat-pack kit.

Every Yutori build leaves one shop in Graham, Washington — clear Western Red Cedar, mortise-joined mahogany, and cedar-and-copper outdoor shower work. The same hands, every time. We sell owner-direct, so the people who build it are the people you talk to.

Built under one roof

Framed, joined, and finished in Graham, Washington — not a flat-pack, not drop-shipped from overseas.

The same hands, every time

The people who design the builds cut every joint. No assembly line, no outsourced sub-builds.

Owner-direct

No dealer and no markup chain. The makers are the people you talk to, and the people who stand behind the work.

Experience the Ritual

Come use it before you buy it.

Photos only get you partway, so we offer the real thing: a 90-minute tour of the working sauna, plunge, and shower. Heat up, plunge cold, rinse off. Then decide.

Book your tour
Hand-built cedar sauna at golden hour in the makers' backyard, Graham, WA, the working tour space
A Yutori co-founder maker at the miter saw in the Graham shop, cutting cedar stock for a build

The Makers

Why we build Yutori.

Yutori — ゆとり — is Japanese for spaciousness. Room to breathe. That’s what these builds are for, and it’s why each one is made slowly, by hand, in one shop.

Read the makers’ story